skip to main |
skip to sidebar
As the title indicates, yesterday I got the email offering the purchase of a Doctor Who Wobble Head kit. Of course, I had already talked myself into buying it, so without much ado (other than finding a browser that the site worked with, newly downloaded Firefox 3.0 not being among them) I plunked down $290.75 and eagerly await my booty.
That not being chump change, I feel like I should actually install it promptly. This has lit the fire of righteous fury under me to create a work area in which I could actually do the work necessary without injury. That means the timetable for the swapping of my wife's and my work areas suddenly has a deadline, and I work great with deadlines.
So let's throw shame to the wind and turn the camera towards the parts of the basement that I usually aim it away from. On the right is my wife's work area. In all fairness, this was briefly organized, and over time has become a desperate cry to be featured on one of those HGTV house cleaning shows. And after it became slightly messy, anything even vaguely craft-related was just tossed in, sort of like compound interest for disorderly spaces. Note the exposed sewer pipe in the background... if that isn't a blog post that's just waiting to happen, I don't know what is. Not shown: The partially collapsed drop ceiling!
On the left is my personal superfund site. And this is after some organization earlier in the year... it used to be worse. And while my wife's area is a collaborative effort, this room is pretty much all me because I'm the only one who can squeeze into it without knocking down precarious piles of stuff, thereby blocking the escape route. So you can see this is a mighty labor that even Hercules would pale at. Say, speaking of the labors of Hercules, maybe I can clean my wife's stuff by breaking the sewer pipe and the resulting river of filth would carry away the mess.
And of course it wouldn't be a blog post without a few new purchases. Here's a mostly populated Pin*bot playfield that I got a few weeks ago. It's pretty thrashed cosmetically, but I figure if that's a problem I can move everything over to the unpopulated playfield. Getting this was kind of a pain... the guy who sold it to me was in California and had never sold a playfield before, so he lacked the basic shipping skills, namely accurate pricing and the acquisition of cheap boxes. The original shipping estimate was $140, but I asked if he could do UPS which should be ~$70. He said fine, so I bid and won. Then he sat on it for a few weeks, during which he said he was trying to get a box. Finally he bought a $15 box, which I called bullshit on and suggested he go to a bike store where they'll give you bike boxes for free (like I said, he was new to this). After much haggling, harsh words, and a few angry tears he finally got it to UPS and they wanted to charge him an oversize box fee... hello? Measure the frickin' box BEFORE shipping! So he cut the box down to size at UPS and shipped it for $75. When I got it, it was basically floating free in the box with a handful of styrofoam appliance packing pieces inadequately protecting it. I could reach into the box and touch the unwrapped playfield. I wanted to kill the guy. By dumb luck it did arrive in reasonable condition, but I think I'll be buying my playfields locally from now on.
This just arrived this week, bought from the guy who sold me the non-working "100% working" WPC display board a few years ago. It's the base and functional parts of Rudy's head on Funhouse. The picture was terrible and the description was practically non-existent (the title was "Funhouse pinball Rudy part" and the description was "You are bidding on a Funhouse Pinball rudy parts". Seriously.). But I won, and it actually turned out to be better than I expected. It's got the jaw piece, the kicker, and three of the four coils. If I could get the jaw motor and gear box, that's really all I would need to play the game, since the face and eyes are all just eye candy anyway.
I don't expect to be buying much for a few months, since eBay season has come to an end and the wobble head has put me either really close to or slightly over my debt ceiling of $1000. So it's as good a time as any to get organized so I can prepare for the new fall season, when I'll have to sell a bunch of boodle to return to solvency.
Last minute addendum! I forgot that for the first time, I won a door prize at the pinball show! Obviously, it's not a pinball machine or flat screen TV, since I probably would have remembered that on the first go round. It's a Pinball Wizards tiny travel alarm clock/calculator/
world time zone thing. I don't know what I'll do with it, but how can I not use it? It's a Major Award!
Actually, one place I could use it is in my new work area! My wife complained that she doesn't have a place for her crafts today... actually, she does, but it's a disaster area (to be fair, not entirely of her own making). We were going to set one up for her in the laundry room, but it's not an ideal space (near water and generally filled with dirty clothes), and it's currently piled to the ceiling with eBay packing supplies and boxes. So she said today that she wishes she could have a room for her crafts. After some negotiating, it was decided that I would move my pinball stuff out of the fake bedroom in the basement (fake -> no closet) and move her craft stuff into the bedroom. She would be away from water and have a whopping two windows for light; I would have a large work area near my games that is convenient to our primary drain pipe, so when it bursts it can spray warm effluent all over my $1000+ collection of playfields!
More on this story as it develops...
My lazy ass is still catching up... 100% of this post is vintage stuff.
I suppose Mrs. Entropy is very tolerant of my hobby. Financially she can't really say much because she spends a lot on sewing, knitting, et cetera, though I'm currently outspending her by almost 2 to 1. She's sort of accepted the amount of space the games take up, and was even willing to allow Quicksilver in the living room, mainly because she likes the art (as I believe I've mentioned before, she's pretty non-committal on Black Knight, Doctor Who, and EBD, but she is heavily irked with the way Mr. Barbarian is drawn on Paragon... he has the body of a dwarf and his right arm and wing are not anatomically possible). She's even sat with me a few times and watched This Old Pinball vids and Pins and Vids 2 & 3... on the last two, she even asked for more information about Wizard Blocks, and was kind of interested in the process of manufacturing Big Bang Bar. And a couple of times she's been very helpful in reading part numbers out of game manuals while I type them in to Illinois Pinball's search engine. My sense is that a lot of Pin Wives are openly antagonistic to their hubbys' hobby.
But realistically, I could probably use some actual friends who play pinball. I think the last time I had friends to play pinball with was high school and college, which is kind of pathetic... and not tele-pathetic, either. I've thought about going to one of the FSPA nights, but they don't meet local to me any more and the remaining meetings are a pretty big schlep for me, though the one in Virginia is only about a half hour from my work. And in addition my meet & greet social skills are poor at best and I worry about what to talk about when the subject of pinball has been exhausted. I think I'm
at my best when people need something from me and are forced to seek me out. Well, that sounds kind of pathetic too. -_-; Anyway, I honestly don't know what I'm going to do about it, but I supposed we'll see.
But enough about my tedious life. As previously reported, I went to the Pinball Wizards show in Allentown and had a pretty good time. I probably say this every year, but it seems like there was a lot more junk this time... games with whole flippers not working (I'm looking at you, Tom Tom!), games that were pretty much never turned on for the whole show, features not working, blah blah blah. But there were a few standouts... I enjoyed playing Gottlieb's Roller Coaster, an early 70's game with proto-habitrails. And I had a hella fun time playing Balls-a-Poppin, a 1956 game with multiball and an auto-plunger. The big surprise this show is I spent less than $100. Now, this isn't for lack of trying, I just don't have a lot to get these days that they sell at shows. Classic Playfield Reproductions came down from the forests of Eastern Canada for what I think is the first time (at a show I've been to, anyway) and they had a grab bag of repro plastics for Pin Bot that I needed... I had to force my brain to remember which plastics were missing on the playfield I had just bought (a populated one this time -- like I said, my ass is lazy, and I am behind; I ended up buying one or two that I had, but in general did pretty well and only didn't buy one). Out in the flea market I picked up a Funhouse subway ramp and a crapload of plastics (several almost complete sets) from a guy for a pretty good price... I had to run back and forth between a parts Funhouse and the ramp, trying to make sure that it was indeed the ramp I needed. I also speculated and bought a beautiful TOTAN subway ramp for $10, hoping I could sell it for more on eBay... which in fact I did, I cleaned it up Sunday, posted it, and it sold for almost $16... I probably made only $3, but small victories count, too! I also put up a few of the extra Funhouse plastics -- a set of the pointing hands -- and that sold for $3 or so, which is bonus since all the plastics together cost me $17. And, of course, I delivered the High Speed cabinet to the guy's proxy... that's a first for me, actually bringing something to a pinball show.
It was not all coolness, though. Harshness came in the form of a Doctor Who parts machine that a guy was selling for $250. I dithered about it for a while, then looked around for an ATM so I could come up with $$$, and in that time someone more decisive bought it. It was a relatively unfaded cabinet, it had the Dalek on top, but the rest was wrapped up so I couldn't see it, but I find it hard to believe that I couldn't have gotten that much and more for it on eBay. And I've had good luck with the parts DW and High Speed that I wanted to see if I had actual instincts that I could use to help pay for my purchases. So, that's this year's One That Got Away.
In an attempt at sociability I did speak to a couple of people, and played a doubles game of Maverick with a guy who I was initially beating but who proved to be a pinball savant. I don't think he totally pasted me, as my last two balls were pretty good, but he was definitely out of my league.
I think the rest of the day was pretty uneventful. Anyway, it's getting late so it's time to wrap it up.
So let's throw shame to the wind and turn the camera towards the parts of the basement that I usually aim it away from. On the right is my wife's work area. In all fairness, this was briefly organized, and over time has become a desperate cry to be featured on one of those HGTV house cleaning shows. And after it became slightly messy, anything even vaguely craft-related was just tossed in, sort of like compound interest for disorderly spaces. Note the exposed sewer pipe in the background... if that isn't a blog post that's just waiting to happen, I don't know what is. Not shown: The partially collapsed drop ceiling!
On the left is my personal superfund site. And this is after some organization earlier in the year... it used to be worse. And while my wife's area is a collaborative effort, this room is pretty much all me because I'm the only one who can squeeze into it without knocking down precarious piles of stuff, thereby blocking the escape route. So you can see this is a mighty labor that even Hercules would pale at. Say, speaking of the labors of Hercules, maybe I can clean my wife's stuff by breaking the sewer pipe and the resulting river of filth would carry away the mess.
And of course it wouldn't be a blog post without a few new purchases. Here's a mostly populated Pin*bot playfield that I got a few weeks ago. It's pretty thrashed cosmetically, but I figure if that's a problem I can move everything over to the unpopulated playfield. Getting this was kind of a pain... the guy who sold it to me was in California and had never sold a playfield before, so he lacked the basic shipping skills, namely accurate pricing and the acquisition of cheap boxes. The original shipping estimate was $140, but I asked if he could do UPS which should be ~$70. He said fine, so I bid and won. Then he sat on it for a few weeks, during which he said he was trying to get a box. Finally he bought a $15 box, which I called bullshit on and suggested he go to a bike store where they'll give you bike boxes for free (like I said, he was new to this). After much haggling, harsh words, and a few angry tears he finally got it to UPS and they wanted to charge him an oversize box fee... hello? Measure the frickin' box BEFORE shipping! So he cut the box down to size at UPS and shipped it for $75. When I got it, it was basically floating free in the box with a handful of styrofoam appliance packing pieces inadequately protecting it. I could reach into the box and touch the unwrapped playfield. I wanted to kill the guy. By dumb luck it did arrive in reasonable condition, but I think I'll be buying my playfields locally from now on.
This just arrived this week, bought from the guy who sold me the non-working "100% working" WPC display board a few years ago. It's the base and functional parts of Rudy's head on Funhouse. The picture was terrible and the description was practically non-existent (the title was "Funhouse pinball Rudy part" and the description was "You are bidding on a Funhouse Pinball rudy parts". Seriously.). But I won, and it actually turned out to be better than I expected. It's got the jaw piece, the kicker, and three of the four coils. If I could get the jaw motor and gear box, that's really all I would need to play the game, since the face and eyes are all just eye candy anyway.
